ThermoWood Ash Hardwood
Resin Aggregate Inserts
21 x 150mm
|(Exc VAT)||(Inc VAT)|
|Price per metre||
|Price per square metre||
Board Lengths: 1.2m, 1.5m, 1.8m, 2.1m, 2.4m, 2.7m, 3m, 3.3m, 3.6m
Superior BS7976 Slip resistance rating for commercial applications than any composite decking, whilst still retaining the natural beauty of hardwood.
Eco Friendly Product
– FSC Certified, this material has been sourced responsibly and harvested from approved forests.
– The ThermoWood process is a process of heat and steam, no chemicals are used.
– This material not harmful to the environment.
- – 25 Year Biological Life
– 100% Natural
– High Quality
– Confirmation of access for a large delivery vehicle
– Someone on-site to accept and help our driver offload the order
– Please note you need to give all possible details of the delivery address (Including complications)
– Any Damaged or Missing items need to be reported to QTD within 24 hours
Our exclusive ThermoWood Resin profile has passed the Certified BS 7976 Slip resistance rating and is primarily used for Public Areas (Commercial use) These boards can also have the grooves down the sides for our INVIZIFIX® Hidden Clip System, as shown in the image above. The boards have a Shallow micro V-Groove profile with two resin aggregate inserts positioned to provide a continuous 75mm spacing between each resin strip.
FSC® certification available on request
What is ThermoWood?
ThermoWood is a thermal modification procedure that preserves wood in its most natural and flawless state for a life-long journey. The “ThermoWood method” involves a carefully computer controlled heat and steam process up to 210 degrees C.
Besides the preservation, the ThermoWood process also causes certain chemical changes in wood. Not only does the colour darken but the stability, decay resistance and insulation properties are largely increased after the process is complete.
The ThermoWood method, brand and logo can only by the used by members of the International ThermoWood Association.
Ash is known for its light colouring but once treated it displays a rich dark colour and attractive grain. With all stable timbers you can use different coloured timbers to create patterns and highlight specific areas like deck perimeters, steps, ramps and changes in levels. You do not need to restrict yourself to one type of timber for the entire project whether it’s decking, cladding, flooring or decorative panelling.
Samples vary in colour so we recommend that you visit a display or show area where you can really get an understanding of what the boards will look and feel like. QTD have their very own unique show areas, why not come and visit us!
Decking Profile Options
Shallow V Groove Profie with Side Grooves for Hidden Clip System
Shallow V Groove Profie with Smooth Sides
Fixing and Finishing Methods
We have our own Hidden Clip system that allows you to lay your decking boards easily without the sight of any screw heads. Our INVIZIFIX® Hidden Clip System means that you would be screwing a highly durable clip into the framework rather than your deckboards. The clips slot into the side of adjoining boards which are pre-grooved on each side especially for this hidden system.
This is a standard method where you simply screw through the top face of the board (pre-drill first if using hardwood) two screws per joist about 25mm in from each side of the board.
We recommend leaving a 5mm gap between each board. Our Hidden fixings will do this automatically for you but if you are using the face fixing method you can purchase our Deck Spacers to create that gap for you. They also show you how far in to position the screws.
We recommend 400mm centre to centre joist spacing for a standard decking area, projects may vary.
End Grain Sealer:
When the timber starts to dry out it loses the moisture quicker through the ends of the timber hence the characteristics of grain checking and opening up. Clear wax sealer seals the timber ends and slows down the moisture loss to a more controlled process, thus preventing this cracking. This is especially useful because cutting off the damaged ends not only becomes an expensive waste of timber, but may mean the difference between having the right length of timber for your project or it being several centimetres too short.
We recommend using our Messmers End Grain Wax Sealer to prevent the boards from grain checking.
Oiling the boards will help you to retain the dark rich colours within the boards. This product contains UV filters to delay the silvering process that strong sunlight causes in all timbers. We can now provide you with two options when it comes to oiling your boards, you can purchase our Messmers UV Plus Oil or you can order your boards pre-oiled saving you the initial labour cost of applying it yourself. If after a year you wish to maintain your investment we can supply the Clean & Oil starter Pack for you to use when convenient.
QTD have been partners with Novawood for many years now and over this time we have been working with them to bring the ThermoWood technology into the UK. We can provide you with Novathermowood and our unrivalled expertise in building with the product. We have created a strong bond which allows us to supply the UK with quality and environmentally friendly thermally treated timber. We can provide you with thermally treated Deckboards, Cladding Boards and Engineered Flooring and much more allowing you to add that all important value added quality and sophistication to your project