FSC ThermoWood Ash Hardwood Cladding

 

Other board widths available: 92mm, 115mm, 150mm
Board Lengths: 1.2m, 1.5m, 1.8m, 2.1m, 2.4m, 2.7m, 3m, 3.3m, 3.6m
Please contact us for other sizes

Ash Hardwood is an essential material in woodcraft, due to its amazing durability. Ash is a hardwood with a high number of growth rings, and features an aesthetic look with its wavy texture. These qualities make Ash Cladding a multi-purpose, aesthetic and durable material. With its beautiful brown colour and its strength. It is good for outdoor areas where heavy traffic is expected. If you seek an elegant look to highlight your spaces, durable and reliable Ash Cladding is the right choice.

Woodworkers generally like the timber for its great finishing qualities. It also has good machining qualities, and is quite easy to use with screws and glue. The Ash timber used in ThermoWood production is sourced from North America.

The most superstitious of trees:
Ash

No other tree seems so tied up with myth and folklore. In ancient times it was believed that man was born from the branches and flesh of the ash tree. Since then it has been the subject of numerous superstitions including the belief that if the winged seeds of an ash do not appear the monarch will die that year. On the Isle of Man ash was believed to protect water purity and it was alleged that women who placed a leaf in their left shoe would immediately meet their future husband.

Other Sizes Available:
20 x 92mm
20 x 115mm
20 x 130mm

FSC Certified: TT-COC-002360 FSC 100%

 

 

25 Year Biological Life

100% Natural

High Quality

f1f3e0_883339a1983f4d41a6bfca0284fe068fmv2

Eco Friendly Product

– The ThermoWood process is a process of heat and steam, no chemicals are used.
– This material is not harmful to the environment and does not go into landfill like most composites.

Why choose ‘Thermally Treated’ timber?

Ecological

  • 100% Natural
  • Free of Chemicals
  • Environmentally friendly and recyclable
  • 25 Year Biological Life

Durability

  • 25+years of Durability
  • Resins and sugars removed
  • Improved durability against fungus and insect attack
  • Highly durable against all weather conditions

Stability

  • High heat treatment removes internal stress
  • Moisture Content & Permeability is reduced.
  • Cupping and Twisting minimized
  • Expansion and Shrinkage minimized

 

Ecological

  • 100% Natural
  • Free of Chemicals
  • Environmentally friendly and recyclable
  • 25 Year Biological Life

Durability

  • 25+years of Durability
  • Resins and sugars removed
  • Improved durability against fungus and insect attack
  • Highly durable against all weather conditions
  • Ecological
  • 100% Natural
  • Free of Chemicals
  • Environmentally friendly and recyclable
  • 25 Year Biological Life

Fixing and Finishing Methods

Hidden Fixings:
You have the option of using our hidden cladding clip fixing with the Palma cladding profile. The hidden clip system allows you to display your cladding boards with no visual sight of screws in the boards. The additional advantage is that if you wish to modify the cladding elevation at a latter date you can remove the boards and re-use them. 

Finishing Brad nails:

Because the Thermowood Cladding is stable and does not cup or twist you can use Stainless Steel Finishing brad nail/pins and depending on the profile you choose, these can be fixed into the profile at an angle of 45 degrees. If you are unsure of the holding strength of a 50mm pin, a bead of flexible silicone can be applied to the batten prior to fixing each cladding board. This will give you a clean appearance to the surface of your timber cladding as they virtually disappear from view. 

Face Fixings:
Standard practise has always been to screw or nail through the face of the cladding which is unsightly and can split the timber. If you wish to do so simply pre-drill stainless screws through the face of the board into the sub-frame to avoid damaging the boards.

Board Spacing:
This will be created regardless of the profile you choose to go with. Do not ram the boards together tightly when fixing so that you allow for any minor movements that can occur with the changes in UK climate. Allowing approximately 1mm will be sufficient for most circumstances.

Cladding Batten Spacing:
We recommend 400mm centre to centre spacing for a standard area, projects may vary.

 

End Grain Sealer:
When the timber starts to dry out it loses the moisture quicker through the ends of the timber hence the characteristics of grain checking and opening up. Clear wax sealer seals the timber ends and slows down the moisture loss to a more controlled process, thus preventing this cracking. This is especially useful because cutting off the damaged ends not only becomes an expensive waste of timber, but may mean the difference between having the right length of timber for your project or it being several centimetres too short.

We recommend using our Messmers End Grain Wax Sealer to prevent the boards from grain checking.

Oil Finish:
Oiling the boards will help you to retain the dark rich colours within the boards. This product contains UV filters to delay the silvering process that strong sunlight causes in all timbers. We can now provide you with two options when it comes to oiling your boards, you can purchase our Messmers UV Plus Oil or you can order your boards pre-oiled saving you the initial labour cost of applying it yourself. If after a year you wish to maintain your investment we can supply the Clean & Oil starter Pack for you to use when convenient.

What is ThermoWood?

ThermoWood is a thermal modification procedure that preserves wood in its most natural and flawless state for a life-long journey. The “ThermoWood method” involves a carefully computer controlled heat and steam process up to 210 degrees C.

Besides the preservation, the ThermoWood process also causes certain chemical changes in wood. Not only does the color darken but the stability, decay resistance and insulation properties are largely increased after the process is complete.

The ThermoWood method, brand, and logo can only by the used by members of the International ThermoWood Association.

Colour Variation

Thermowood treated Ash is a chocolate brown in colour and has fairly consistent tones throughout the board. With all stable timbers you can use different coloured timbers to create patterns and highlight specific areas like deck perimeters, steps, ramps and changes in levels. You do not need to restrict yourself to one type of timber for the entire project whether it’s decking, cladding, flooring or decorative panelling.

Samples can vary in colour so we recommend that you visit a display or show area where you can really get an understanding of what the boards will look and feel like. QTD have their very own unique show areas, why not  come and visit us!

Delivery

​Confirmation of access for a large delivery vehicle
Someone on-site to accept and help our driver offload the order
Please note you need to give all possible details of the delivery address (Including complications)
Any Damaged or Missing items need to be reported to QTD within 24 hours

Get In Touch!

We’d love to hear from you; whether you have a question, have a query or a project in mind, we’d love to know! Please use our contact form below or if you would like to talk to us,
call on: 0118 373 2212